MacHomeStore.com

INSTEON KeypadLinc Dimmer
[2486D]

$69.99

Wall Plate Not Included

click to enlarge

Wall Plate Not Included

The INSTEON KeypadLinc Dimmer is the Swiss Knife of in-wall controllers

It possesses the functionality of a SwitchLinc V2 Dimmer along with a capability to perform as a 6 button or 8 button KeypadLinc. See the options offered at the bottom of the page to designate whether you want the 6 button or the 8 button module. And - it is X10 compatible also. It is definitely the ultimate remote control keypad. Sorry, it does not include a bottle opener. But, don’t forget FAST. INSTEON devices are so much faster than X10 that a human usually cannot detect a delay. In most cases, it takes less than .05 of a second for a signal to get to its destination.

New Features
Look at what you get in this state-of-the-art keypad and read further for more detail.

Higher 600 Watt Rating
Up to 50% thinner than other dimmers
Brighter, fuller button back lighting
Improved tighter fitting to trim frames
INSTEON Compatibility, works with X10
Can be a member of over 400 scenes

Scene Lighting - Change the Lighting to Match Your Mood

Scenes allow you to control multiple lights, rooms or even the whole home with a single INSTEON command. All member lights will ramp to your independently desired levels at your chosen ramp rate(s). Because the KeypadLinc can be a member of over 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various mood lighting scenarios with a single button press. These are elegant features usually found only in systems costing thousands of dollars and requiring extensive rewiring of your home.

Adjustable On Level / Resume Dim

Each INSTEON KeypadLinc Dimmer can easily be programmed to come "on" to any brightness level from 3% to 100%. A closet light might be best at 100% brightness while you may choose to have your living room lights come on at 50% saving money. Of course, you can easily brighten either circuit to full on. Another "on level" option is to have the light come on to its last on level. This is known as Resume Dim. Programming can be done at the keypad or with a home automation control program like Indigo.

Adjustable Fade Rate

You can adjust the rate at which the light being controlled turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking. Conversely, you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 minutes (for a simulated sunrise or sunset).

Dimmable

You can adjust the brightness level locally by pressing and holding the desired button of the INSTEON KeypadLinc Dimmer. You can also adjust the brightness remotely by sending it dims and brights or by sending it a Preset Dim command. If you need to control a fluorescent light fixture, consider the INSTEON SwitchLinc Relay.

Thin and Easy to Install

Have you ever gone through the frustration of trying to force a thick bodied switch in that too-small wall box? Then you’ll appreciate the fact that the INSTEON wall devices like the KeypadLinc is 50% thinner than other competitive devices.

Control — Options, Options, Options

This professional-quality in the wall controller communicates with all INSTEON and X10-compatible devices. And, they do it over wiring that's already installed in your home. No retrofit wiring is required! Once the components are in place, simply press one INSTEON KeypadLinc Dimmer button, and all the lights programmed to respond will create a lighting scene that you design. Give each scene a name (i.e. "Movietime," "Dinnertime," "Party," etc.) and you can recall that scene in an instant!

Flexible Setup

The INSTEON KeypadLinc Dimmer gives you tremendous flexibility in setup. Other wall-mounted keypads only provide on/off control. However, each KeypadLinc button can perform up to four different functions thanks to a programmable "toggle" ability. Press once for ON, press again for OFF. Press and hold to brighten, press and hold again to dim. If you prefer, turn off the toggle feature to send the same command every time. Best of all, all the settings are electronically set (no code wheels!) and held in non-volatile EEPROM memory.

Monitor Other Devices

The KeypadLinc buttons illuminate when ON signals are sent and when signals are detected from other INSTEON devices linked to the KeypadLinc. This allows the KeypadLinc to monitor lights in other rooms, this feature is incredibly useful if you want to control lights that aren't easily seen from the location, like those in basements, garages, attics, etc.

Other INSTEON KeypadLinc Dimmer Quick Facts

Night / Status Light - A small, subtle white LED at the bottom of KeypadLinc makes it easy to find in a dark room.
Easy to Install and Set Up - KeypadLinc wires in like a standard wall switch, with an additional connection to a neutral wire.
Status Confirmation - This feature is essential when you need to know if the device being controlled is on or off.
3- & 4-Way Ready - Simply add more SwitchLinc V2 Dimmers or KeypadLinc V2 Dimmers to build a 3-way circuit, add two of them to build a 4-way circuit, add three for 5-way, etc.
Double Tap - Double tap of the ON button brings light to full on fast while a double tap of the OFF button turns lights off fast.
Power Failure Features - All KeypadLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, KeypadLinc Dimmer will return to its last brightness level upon a power restore.
Full 2-Year Warranty

Specifications

Voltage & Frequency: 120VAC, 60Hz
PLC Levels: min. transmit level: 2V; max. receive level: 10mV; max. signal rejection: 200mV
Dimensions: 4.14" H (10.516cm) x 1.73" W(4.394cm) x 1.68" D (4.267cm) (front bracket); 2.76" H (7.01cm) x 1.73" W (4.394cm) x 1.40"D (3.556cm) (main body)Maximum Load: 600 Watts
Minimum Load: No minimum load required
Circuit Types: Single pole / 3, 4 and 5-way ready
Operating Temperature: 32°F to 108°F
Neutral Connection: Required
Controllable Device Types: Incandescent, low voltage lighting, floodlights, energy saving bulbs, ceiling fan (may hum)

Tabletop Pedestal Enclosure Now Available

Want your KeypadLinc to be a tabletop controller? Then you should consider purchasing a Tabletop Pedestal Enclosure. Once your KeypadLinc is mounted in the pedestal enclosure, you can unplug and move your newly minted controller to any room without losing the programming you may have done for each button.

Want a Different Frame Color?

Your INSTEON KeypadLinc Dimmer comes out of the box with a white frame and white buttons. However, if white is not your choice, then the frame and buttons can be replaced with a different color that is more suited for blending in with your décor. Easy to install change out color frame and button kits can be found here.

Available Options:
6 or 8 Buttons?:

Qty: