MacHomeStore.com

INSTEON SwitchLinc V2 Relay
[2476S]

$45.99

Wall Plate Not Included

click to enlarge

INSTEON Control for Your Fluorescent Lights

You’ve got your two INSTEON AccessPoints installed and maybe a INSTEON LampLinc or two in place. Now it's time to move on to those wall switches and the INSTEON SwitchLinc V2 Relay is the one you want for those non-dimmable lighting situations in your home. It provides both local (at the switch itself) and remote control of fluorescent or other non-dimmable lighting.

The INSTEON SwitchLinc V2 Relay has all the great features as the X10 SwitchLinc 2-Way Relay plus some enhancements.

Can be a member of up to 400 scenes instead of the “mere” 64 for the X10 SwitchLinc 2-Way Relay
X10 compatible – works with legacy X10 products
LED color change (red, blue, amber, and green) kit available as add-on option
Half an inch less in depth than similar switches making installation easy even in small junction boxes.

True Rocker Action and High Quality Construction

The INSTEON SwitchLinc V2 Relay offers the natural feel of high-end switches: tap the top to turn lights on, tap the bottom to turn lights off. You will also enjoy the crisp, tactile response with each touch, instead of the mushy feeling of other brands.

Quieter and Cooler

The INSTEON SwitchLinc V2 Relay uses a hard-contact relay to control the load while many other switches use a semiconductor (called a triac) that absorbs about two volts of power and dissipates the heat through the front of the switch. By using a relay, the switch runs cooler and full voltage gets to the load.

Status Confirmation

Of course, like all INSTEON modules, it’s ”2-Way.” You can poll the status of the INSTEON SwitchLinc V2 Relay for an instant status “on/off” report. This feature is essential when you need to know if the device being controlled is on or off, especially when you are controlling it via the web or telephone.

Easy to Install and Set Up

The INSTEON SwitchLinc V2 Relay wires in like a standard wall switch, with an additional connection to a neutral wire.

Compatibility

The INSTEON SwitchLinc V2 Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. The SwitchLinc V2 Relay can then be remotely controlled with a INSTEON ControLinc and/or Indigo. Since the SwitchLinc V2 Relay can also be assigned an X10 house code, if you have the PowerLinc Controller, then you can communicate to it with Indigo using the X10 protocol. However, if you have downloaded Indigo and have the INSTEON PowerLinc V2 Controller,, then you will be able to control it using native INSTEON commands for increased reliability and response speed.

Power Failure Features

All INSTEON SwitchLinc V2 Relay settings are stored in static memory and are not lost during power failures.

LED Indicator Bar and Choice of Color

An elegant bar of 8 LEDs is on the INSTEON SwitchLinc V2 Relay. This can be exceptionally helpful when it is difficult to see the light being controlled (e.g. outside or behind closed doors). A pipe color change out kit is available in a package containing assorted colors: red, blue, amber, and green OR a package containing 8 change-out pipes of all one color.

Want a Different Paddle Color?

Your INSTEON SwitchLinc V2 Relay comes out of the box with a white paddle installed. However, if white is not your choice, then the paddle can be replaced with a different color that is more suited for blending in with your décor. Easy to install paddle change out kits can be found here.

Specifications

Voltage & Frequency: 120VAC, 60Hz
Dimensions: 1.78"w x 4.13"h x 1.05"d (front bracket) / 1.77"w x 2.68"h x .95"d(main body)
Maximum Load: 15 amps; 480 watts for incandescent loads
Controllable Device Types: Incandescent, fluorescent and some inductive loads
Neutral Connection: Required
Warranty: 2 years

Qty: