MacHomeStore Cart Contents  Checkout  
  Top » Catalog » Lamp Control » 2472D My Account  |  Cart Contents  |  Checkout   
Categories
Sofware / Starter Kits
INSTEON™ Modules
INSTEON™ Dual-Band
Z-Wave Products
Controllers
Signal Enhancers
HVAC/Thermostats
Input/Output Devices
I/O Linc Kits
Remote Control
RF Receivers
Wireless Sensors
IR Products
Smoke/Motion Detection
Lamp Control
Appliance Control
Keypads
Wall Switches >
Wall Outlets
Leak Detection
Irrigation
Accessories
Audio and Video
* FINAL CLEARANCE *
Discontinued
* ON SALE *
MacHomeStore.com
Shipping & Returns
Privacy Policy
About Us
Contact Us
Customer Comments
Product Search
 
Advanced Search
INSTEON OutletLinc Dimmer (Dual Band)
[2472D]
$59.99
click to enlarge
click to enlarge
Dimmer Key over Plug
Dimmer Key over Plug
Dimmer Key Unlocks Power
Dimmer Key Unlocks Power
Wiring Diagram
Wiring Diagram

An INSTEON Wall Outlet with a Built-in Lamp Dimmer and it's DUAL BAND!

Features

  • One (upper) remotely controllable outlet and one (lower) standard (always on) outlet
  • Tamper-resistant shutter mechanism for protection against improper object insertion and electric shock
  • Controllable outlet supports "load sense" - manually switching load on (at load) will turn outlet on
  • Auto-off, Over temp sensor
  • Dual-band: communicates simultaneously over both radio frequency (RF) and the powerline
  • Functions as an AccessPoint for RF-only devices
Basic Info

This INSTEON receptacle is the first of its kind to offer a built-in dimmer that can be remotely controlled from anywhere using devices such as an INSTEON RemoteLinc , or KeypadLinc or from triggers and schedules you have set up in Indigo . And, of course, the iPhone/iPad Indigo Touch App that comes with Indigo is always there as a remote control device from anywhere - - - in or away from your home.

The INSTEON OutletLinc Dimmer has advanced features like an adjustable ramp rate that slowly brings the lamp on, a preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on initially, as well as load sense, so you can still use the lamp's built-in switch to turn the light on and off. It's made to be installed in place of any wall receptacle and controls incandescent loads up to 300 Watts. Also features a standard (always on) outlet rated up to 15 Amps for the bottom outlet.

For added convenience, the OutletLinc Dimmer bottom outlet is always on. So, whether you need an outlet in the hallway for the vacuum, or an outlet behind the living room couch for an INSTEON tabletop controller , you'll never have to worry about the outlet being switched off. Also, if you ever need to switch the top outlet on manually, you can either use OutletLinc's built-in ON/OFF button (located between its two outlets) or turn your lamp or appliance on and off with its own ON/OFF switch (with load sensing enabled).

Dimmer Key

In order for the top outlet dimmer to work, the lamp plug must have the Dimmer Key attached. This key is a small, razor-thin piece that goes over the lamp plug. This prevents others in your home from unplugging the lamp and plugging in non-dimmable appliances that could result in damaging of the appliance.

Reliability and Network Enhancements

The INSTEON OutletLinc Dimmer features dual-band technology which allows the device to send and receive INSTEON commands using both radio frequency (RF) and power line. This means you can control the dimming outlet from power line-only or RF-only devices, it will repeat both signal types for other devices in your network, making your entire INSTEON system faster.

Since the INSTEON OutletLinc Dimmer is dual-band device, it can also act as a phase bridge when paired with another dual-band device in the home.

X10 Compatible

The INSTEON OutletLinc Dimmer is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that the module can respond to X10 commands from a program like Indigo. Note that all INSTEON devices repeat INSTEON signals thus making your INSTEON network even stronger. However, if used as an X10 device, X10 commands are not repeated.

Non-Volatile Memory

All OutletLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures.

Specifications
  • Warranty: 2 years, limited
  • Status LED: Dual Color, Green & Red
  • Dimensions: 4.1" H x 1.73" W x 1.73" D 2.76" H (7.01cm) x 1.73" W (4.394cm) x 1.40"D (3.556cm) (main body)
  • Maximum Load (Dimmer Outlet): 300 Watts (for incandescent loads)
  • Maximum Amps (Always on Bottom Outlet): 15 Amps
  • Memory: Non-volatile EEPROM
  • Operating Environment: Indoors
  • Operating Temperature: Indoors, 32°F to 104°F, up to 85% relative humidity
  • Thermal Overload Protection: Disabled controlled outlet until condition resolved and operated with ON command or front button push.
  • Supply Voltage: 120 Volts AC +/-10%, 60 Hertz, single phase
  • Load Type: Incandescent
  • Surge Resistance: Up to 500 VAC
  • Neutral Connection: Required
  • INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
  • INSTEON Scene Links: 400
  • INSTEON Commands Repeated: Yes
  • X10 Address: 1 optional (comes unassigned)
  • Wires: Black - Hot, White - Neutral, Bare Copper - Ground

NOTE: Trimplate is NOT included with module.

  Qty:
Shopping Cart more
0 items
Manufacturer Info
Other products
Tell A Friend
 
Tell someone you know about this product.
Customer Comments more
I really appreciate how quickly you got back to me on this defective module issue. Yes, all the info below for my shipping address is still correct. As you correctly surmised, I don't have the original box so I will send back...


Copyright © 2013 Marmat Enterprises, LLC