MacHomeStore.com

IRLinc™ - INSTEON IR Receiver
[2411R]

$99.99

click to enlarge

Now includes credit card remote!

Control your INSTEON devices with your IR universal remote!

The IRLinc – INSTEON IR Receiver will allow you to push a pre-programmed button on your universal remote and control any INSTEON device in your home. And, of course, in concert with the Trigger feature of Indigo an IR remote button can control multiple INSTEON devices to set a lighting “scene” just the way you want it as you sink down in your sofa to watch the latest movie on your wide screen HD television

Highlights

Compatible with most programmable remote controls
Talk-back LED confirms compatible IR commands
Wide-angle IR receiver gives you maximum flexibility
Sleek black finish blends with your A/V equipment
Pass through outlet on face of module
INSTEON technology provides superior performance and reliability

Easy to Set Up

IRLinc is compatible with most NEC-brand IR codes, which nearly guarantees your remote will work with it. IRLinc's talk-back LED allows you to identify easily which IR codes are compatible. After programming a compatible NEC code into your remote, IRLinc is easy to set up like other Smarthome-brand INSTEON products, using simple Plug-n-Tap setup. Of course, with Indigo as your home automation program, your control options over your X10 and INSTEON devices multiply even more.

X10 Compatible

IRLinc is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all their existing X10 devices. X10 ready means that IRLinc can control X10 devices, using X10 commands. Please note that INSTEON devices repeat INSTEON signals but not X10.

Credit Card Remote

The IRLinc now ships with the credit card remote. The credit card remote is small enough to be taken with you anywhere you go in your home. With the credit card remote you can control 12 scenes - 8 On / Off button pairs, 4 scene activation buttons and all on / off. You can easily set up scenes with add/remove buttons. The credit card remote does not support X10.

Non-Volatile Memory

All IRLinc settings are stored in non-volatile memory and are not lost during power failures.

Specifications
General

Color: Black
Warranty: 2 years
Status LED: 1 Blue LED (On side)
Talk Back LED: 1 Green LED (On Bottom)
Operation Modes: INSTEON only or X10 only
IR Code: NEC IR codes

INSTEON Features

Setup Memory: Non-volatile EEPROM
INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 417 out of 16,777,216 possible
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 10 mVpp nominal
INSTEON Messages Repeated: Yes

Mechanical

Operating Conditions: Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions: 4.0" H x 2.5" W x 1.5" D
Weight: 14.4 oz

Electrical

Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Power Plug: 3-pin grounded
Pass-through Outlet: 3-pin grounded
Maximum Pass-through Load: 15 Amps

X10 Features

X10 Controlable Addresses: 255 possible
X10 Powerline Frequency: 120 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Messages Repeated: No

IR Sensor

IR Sensing Distance: 30 Feet
IR Sensor Head Dimensions: 3/8" H x 1" W x 1 7/16" D
IR Cord Length: 81.5" (tip to tip)
IR Connector: 1/8" mini plug
Operating Temperature: Indoors, 14 to 122°F

Credit Card Remote

Color: Black
Dimensions: 3.3" H x 2" W x .3" D
Power: 3V lithium battery (CR-2032 Coin Cell included)
Maximum number of scenes: 12 + ALL ON/OFF
Commands supported: On, Off, Dim, Bright, ALL ON/OFF, Link/Unlink
X10 Addresses: X10 not supported

Qty: