MacHomeStore.com

INSTEON In-LineLinc Relay
[2475S]

$45.99

click to enlarge

The INSTEON In-LineLinc Relay allows you to include fluorescent or or non-dimmable lights, fans, and other appliances in your INSTEON network without the hassle of wiring in a new wall switch. The INSTEON In-LineLinc Relay is easy to install and set up and its functionality mimics that of the well established and popular INSTEON SwitchLinc V2 Relay

Wires in line for ceiling fans and fluorescent lighting circuits without wall switches
Inserts in multiple whole-house lighting scenes in minutes
Easy-to-install relay uses INSTEON technology for superior performance and reliability

Advanced Remote-Controllable Inline Relay

Fill your entire home with personalized mood lighting for any occasion. The INSTEON-Enabled In-LineLinc Relay is made to run silently no matter what kind of device you connect to it. The INSTEON In-LineLinc Relay functions only as an on/off switch. If you need to control incandescent bulbs, low-voltage halogen (e.g. track), and other low-voltage lights with magnetic or dimmable electronic transformers, try the INSTEON In-LineLinc Dimmer.

Use Indigo and the INSTEON PowerLinc V2 Controller and you can schedule any In-LineLinc Relay or any other INSTEON-enabled device to turn on or off at a specific time or even at sunrise and sunset. Or, you can use any INSTEON wall switch to trigger (i.e. control) an action from your In-LineLinc Relay. With the In-LineLinc Relay’s remote control ability, you can have the convenience of adding a bedside controller like the INSTEON ControLinc V2 to turn off the devices being controlled after you get into bed. Very neat!

Easy To Install

The INSTEON In-LineLinc Relay is easy to install and set up. Use the provided screws to mount in a standard J-box or remove them using the screw tabs to mount in a more compact area such as a ceiling light fixture. Screw tabs can be removed using pliers when you are installing into a fixture box with limited space. You don't need to go through the hassle of running the wiring for a new wall switch. By installing an In-LineLinc in a fixture box, you'll be able to control the fixture from any location in your home. Simply install the In-LineLinc in the fixture box, link it manually to any other INSTEON device before you close the opening. If you are using a sophisticated home automation control program like Indigo, be sure and write down the unique six character INSTEON address code before you seal up the J-box. You will use this code to define the module to Indigo and thus be able to control it and involve it in “trigger” events and any other sophisticated scripts you might define.

Quieter and Cooler

Because the INSTEON In-LineLinc Relay is built with a much quieter relay than most remote-control ON/OFF relays, it has a click that's more than 80 percent quieter than traditional relay switches. This allows you to control lights and other non-dimmable devices remotely without waking up the baby, annoying other family members, or sending your cat fleeing across the room. The click of the INSTEON In-LineLinc Relay's internal relay is barely audible.

Unlike triac-based switches, the INSTEON In-LineLinc Relay uses a hard-contact relay to control the load. Other switches use a semiconductor that absorbs about two volts of power and dissipates the heat through the front of the module. By using a relay, the device runs cooler and full voltage gets to the load.

Compatibility

The In-LineLinc Relay is fully INSTEON compatible and X10 ready. Homeowners with existing X10 networks can easily migrate to an INSTEON network without having to discard all of their existing X10 devices. X10 ready means that it can respond to X10 commands from an X10 controller. Please note that INSTEON devices repeat INSTEON signals but not X10.

Non-Volatile Memory

All In-LineLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the In-LineLinc Dimmer will return to its last brightness level when power is restored.

Specifications

Warranty: 2 years
INSTEON Links: 417
INSTEON Powerline Frequency: 131.65 KHz
Dimensions: 3.75" H x 1.8" W x 1.2" D (2.75" H without screw tabs)
Weight: 3.6 oz.
Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Power Wire Leads: 6", 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
Load Types: Wired-in incandescent lighting and inductive loads
Maximum Load: 400 watts incandescent, 10A resistive

Qty: